-
About Flexfilm 2
-
Getting Started 10
-
Core Fundamentals 10
-
-
Orders & Support 77
-
Shipping 9
-
Dealer Rewards 13
-
Ordering & Account 7
-
Pre-Cut Patterns 2
-
General 7
-
Warranty 6
-
Installer & Dealer Program 24
-
Billing & Tax 2
-
Route Package Protection 2
-
Returns & Refunds 2
-
Shop Pay 2
-
Training 1
-
-
Installation Resources 16
-
Architectural 4
-
Automotive 5
-
General 7
-
-
Architectural Window Film 50
-
Safety & Compatibility 16
-
Ownership 2
-
Fundamentals 13
-
Buying Guides 4
-
Performance & Privacy 6
-
Product Guides 9
-
-
Automotive Window Film 38
-
Installation & Ownership 16
-
Product Guides 11
-
Legal & Compliance 3
-
Buying Guides 8
-
-
Plotters 7
-
Ownership 5
-
Buying Guides 2
-
-
FlexCut Software 12
-
Account & Licensing 4
-
Getting Started 6
-
Troubleshooting 2
-
-
Paint Protection Film (PPF) 10
-
Ownership 3
-
Fundamentals 4
-
Product Guides 3
-
-
Surface Coatings 12
-
Product Guides 6
-
Fundamentals 3
-
Ownership 3
-
Prep & Decon
Prep & Decon
Before any coating goes on, the surface underneath needs to be genuinely clean — not just washed. This group covers the decontamination and prep products that get a surface ready to bond, whether that's stripping embedded iron and limescale, wiping away final oils before a coating, priming a repainted panel, or a gentle pre-wash.
Alpha Fallout Direct
An iron and limescale remover built for fast decontamination, dissolving embedded brake dust and mineral deposits that a standard wash won't touch. Spray one panel at a time, let it dwell up to 10 minutes, then rinse thoroughly. Wear gloves and work in a well-ventilated area.
| Type | Iron & limescale remover |
| Application | Spray, dwell up to 10 minutes, rinse |
| Recommendation | Professional and DIY friendly |
| Safe Surfaces | Painted exterior panels, wheels |
Alpha Prep
A panel prep cleaner used as the final wipe-down immediately before applying a coating, clearing any remaining oils or residue so the coating bonds properly.
| Type | Panel prep cleaner |
| Application | Spray and wipe with a clean microfiber towel |
| Recommendation | Professional and DIY friendly |
| Safe Surfaces | Clear coat, plastic, metal, rubber, chrome, glass |
Alpha Base Coat 10H
A specialized primer built specifically for repainted, restored, or vintage surfaces, recommended as a prelude to any Coating Farm USA coating on surfaces like these. It boosts adhesion and durability, and carries the same 10H+ hardness rating and pad-based application as Alpha Prime Graphene 10H.
| Durability | Improves adhesion/durability of the coating applied over it |
| Hardness | 10H |
| Type | Primer coating |
| Application | Apply and buff (1/3 hood sections, 100 seconds) |
| Recommendation | Professional-grade |
| Safe Surfaces | Repainted, restored, or vintage clear coat |
| Finish | High gloss |
| Resistances | Chemical, environmental, scratch |
Alpha Foam
A pH-neutral snow foam shampoo used as a gentle pre-wash step to loosen surface dirt before the main wash, reducing the risk of introducing swirl marks during the wash itself.
| Type | Snow foam shampoo |
| Application | Spray, let sit 2–4 minutes, rinse before it dries |
| Recommendation | Professional and DIY friendly |
| Safe Surfaces | Clear coat, plastic, rubber, glass |
