Tint-Tac Slip Solution

Want your Flexfilm to lay flat, hug the dot‑matrix, and stay put around painted edges? It all comes down to the mix in your sprayer. Here’s the no‑fluff guide to getting perfect Flexfilm installs!

Works for Automotive and Architectural Window Films

These ratios are dialed in for pressure‑sensitive automotive window tint, and they perform just as smoothly on pressure‑sensitive architectural window film.

Using dry‑adhesive architectural film? Start with roughly 25–50 % of the mix I state below.

What You Need

• Distilled or reverse‑osmosis water – minerals in tap water can hurt adhesion and even clarity.
• SlipX (dish soap-based) or Tint‑Tac (shampoo-based).
• A clean 32 oz spray bottle and the product’s own cap for measuring.

Why Most Pros Pick Dish Soap

Years of installer feedback show dish‑soap formulas pair best with urethane adhesives. They give enough slip to position the film without leaving so much residue that panels curl later. Shampoo works too—you just use twice as much product.

Mixing Ratios (32 oz Bottle)

Official Directions (per gallon)

• SlipX: Add 0.4 oz of SlipX to 1 gallon of water. Mix well.
• Tint‑Tac: Add 1 oz of Tint‑Tac to 1 gallon of water. Mix well.

Hot & humid shop? Add a splash more.
Cooler temps? Use a hair less so tack stays snappy.

Quick Step‑By‑Step

1. Fill the bottle halfway with distilled water.
2. Measure SlipX or Tint‑Tac with the cap (see table).
3. Pour and swirl gently—avoid whipping foam.
4. Top off to 32 oz, tighten the lid, and give one slow roll to mix.
5. Test on scrap glass. Too slippery? Back off a few drops. Grabbing too quick? Add a touch more.

Troubleshooting

Wrap‑Up

Stick with distilled water, use 1 cap SlipX or 2 caps Tint‑Tac per 32 oz bottle, and tweak only for extreme weather. Once you nail your local ratio, write it on the bottle so every refill is identical. Smooth installs, happy customers – done.

Shipping

Orders placed by 12:30 PM CST will be shipped out the same day. Orders placed after this time will be shipped on the next business day. We offer both standard and expedited shipping options within the United States. Exclusions apply.

Enjoy free shipping on orders over $750.

United States Shipping Options (Restrictions may apply):

• UPS® Ground
• UPS 3 Day Select®
• UPS 2nd Day Air®
• UPS Next Day Air Saver®
• UPS Next Day Air®
• UPS Next Day Air® Early

For more details and restrictions, please refer to our full shipping policy.

Returns

Films

• 30-day return policy.
• Buyer covers return shipping (deducted from refund if originally free).
• Up to a 20% restocking fee.
• All materials must be returned.
• Used rolls may receive a partial refund.
• No refunds for buyer’s remorse, misuse, or damage from lack of skill.

Pre-Cut Patterns

• No returns or refunds for custom films.

Tools & Equipment

• All sales are final.
• We replace wrong or defective items at our expense.
• No refunds for buyer’s remorse, misuse, or damage from lack of skill.

Plotters

• 30-day return if in re-sellable condition and original packaging.
• Overseas customers pay return shipping.
• Up to a 20% restocking fee may apply.
• No refunds for buyer’s remorse, misuse, or damage from lack of skill.

For more details and restrictions, please refer to our full return and refund policy.