Automotive Window Film Samples

At Flexfilm, we charge for our window film samples—and there's a good reason for it. Our business model is different from a lot of other companies out there. We don't lock you into a closed dealer structure with things like territories, quotas, buy-ins, or other restrictions. That open approach makes it easier for everyone to try our products, but it also opens the door to a few people trying to game the system.

We've seen situations where someone orders a sample not to test the film but to tint part or even an entire vehicle. That's not the point of offering samples, and it hurts our ability to keep things fair for serious installers and business owners who genuinely want to explore our products.

Charging for samples helps us keep the process honest and ensures that the people requesting them are actually considering using our films. But we get it—nobody wants to pay for a test piece and feel like they've wasted money. That's why we make it easy to turn your sample into a win. If you buy a sample roll and decide you like the product, we'll send you a discount code to apply the cost of that sample roll toward your first full roll purchase. It's our way of saying thanks for giving us a try.

We believe in being open and transparent about how we do business. Our goal is to help installers and business owners succeed without the red tape. Charging for samples is just one of the ways we stay committed to fairness while giving you full access to try our films risk-free.

If you have any questions or need help choosing a film to sample, reach out! We're here to help. Click here to visit our contact page.

Want your Flexfilm to lay flat, hug the dot‑matrix, and stay put around painted edges? It all comes down to the mix in your sprayer. Here’s the no‑fluff guide to getting perfect Flexfilm installs!

Works for Automotive and Architectural Window Films

These ratios are dialed in for pressure‑sensitive automotive window tint, and they perform just as smoothly on pressure‑sensitive architectural window film.

Using dry‑adhesive architectural film? Start with roughly 25–50 % of the mix I state below.

What You Need

• Distilled or reverse‑osmosis water – minerals in tap water can hurt adhesion and even clarity.
• SlipX (dish soap-based) or Tint‑Tac (shampoo-based).
• A clean 32 oz spray bottle and the product’s own cap for measuring.

Why Most Pros Pick Dish Soap

Years of installer feedback show dish‑soap formulas pair best with urethane adhesives. They give enough slip to position the film without leaving so much residue that panels curl later. Shampoo works too—you just use twice as much product.

Mixing Ratios (32 oz Bottle)

Official Directions (per gallon)

• SlipX: Add 0.4 oz of SlipX to 1 gallon of water. Mix well.
• Tint‑Tac: Add 1 oz of Tint‑Tac to 1 gallon of water. Mix well.

Hot & humid shop? Add a splash more.
Cooler temps? Use a hair less so tack stays snappy.

Quick Step‑By‑Step

1. Fill the bottle halfway with distilled water.
2. Measure SlipX or Tint‑Tac with the cap (see table).
3. Pour and swirl gently—avoid whipping foam.
4. Top off to 32 oz, tighten the lid, and give one slow roll to mix.
5. Test on scrap glass. Too slippery? Back off a few drops. Grabbing too quick? Add a touch more.

Troubleshooting

Wrap‑Up

Stick with distilled water, use 1 cap SlipX or 2 caps Tint‑Tac per 32 oz bottle, and tweak only for extreme weather. Once you nail your local ratio, write it on the bottle so every refill is identical. Smooth installs, happy customers – done.

Yes, if you purchase a sample roll from us and decide to move forward with a full roll of film, please contact us for a discount code. This code will deduct the cost of your sample roll from your first full roll purchase. Contact us at sales@flexfilmplus.com or 256-748-8468.

Please be patient when ordering a sample roll. Orders will ship within 48-72 business hours from purchase.

Sample rolls come in two sizes: 40" x 10' and 40" x 20', and are only available in specific shades.

After placing your order, a Flexfilm sales specialist will contact you to validate your order. A valid business is required to order a sample roll.

Only one sample roll per product, per company is allowed, and quantities over one will not be honored. Discount codes cannot be applied to sample rolls.

For questions, contact us at sales@flexfilmplus.com or 256-748-8468.