Solar Control Window Tint

It takes patience, but many people install it themselves successfully. Using the right tools and taking your time makes a big difference.

View our guide.

At minimum you'll need a spray bottle, slip solution, squeegee, and sharp blade. Our DIY Window Film Application Kit include everything most people need to get started.

Dry adhesive (CDF) starts non-sticky and activates with a slip solution, then gradually forms a chemical bond with the glass. This makes it easier to handle, adjust, and rework during installation—especially on large, flat glass—while also being more resistant to contamination early on. Pressure-sensitive (PS) adhesive, on the other hand, is immediately tacky and bonds on contact, making it ideal for faster installs and curved or complex surfaces. In short, dry adhesive gives you more working time and precision, while PS adhesive delivers instant hold and speed—each suited to different applications and installer preferences.

Yes, you absolutely need a slip solution for a smooth, successful installation. It allows you to position the film, remove bubbles, and get a clean finish. We recommend using our Tint-Tac slip solution, or grabbing our DIY Window Film Application Kit, which includes everything you need to get the job done right.

Most architectural window film installs on the inside of the glass.

Some films will reduce light slightly. Privacy and reflective films usually darken the glass more than ceramic or frosted films.

Yes. Window film helps reduce solar heat and glare, which can make rooms more comfortable and easier to cool.

Reflective films provide privacy during the day. At night, when lights are on inside, people may still see in.

Yes. Window film can be removed if needed, although it may take some time and effort depending on how long it has been installed.

Every window is different. Some glass types are more sensitive to heat. If you're unsure what type of glass you have, we recommend consulting a professional installer before installation.

Not necessarily. Reflectivity depends on the film design. Some darker films are very reflective, while others maintain a more natural look.

Mirror‑type privacy relies on exterior light. At night, interior lights reverse the effect. Use blinds or dim lights to maintain privacy.

Reflective films can create daytime privacy because the brighter side of the glass becomes reflective. During the day it’s brighter outside, so people outside see the reflection instead of inside. At night, when lights are on inside, the effect reverses.