Can Ceramic Window Tint Really Make A Difference?

I just ran a quick shop-floor experiment that proves a point I have been making for years: infrared rejection is only half the battle. Unless you pair that IR layer with the right ceramic tech, the heat you block will slam straight through the glass and roast the cabin anyway. Below is the play-by-play along with a few takeaways you can use in your own shop.
Step 1: The Baseline IR Film
I grabbed a clean roll of high-end IR tint. No ceramic, no dye, just pure infrared blocking. On the EDTM Solar Spectrum meter it posted an 80 percent IR block. Most suppliers would call that “premium” and slap a fancy label on the box.
Meter reading: 20 percent IR transmission, 80 percent blocked.
Step 2: Heat Box Reality Check
Numbers look great until you feel what the sun is really doing. I dropped that same film in the heat box and fired up the bulb. The heat-sensitive sheet lit up fast, showing hot spots that would cook anyone sitting inside the car. The film absorbed the energy then dumped it right back out. Fancy spec sheet, poor real-world comfort.
Step 3: Enter the Ceramic Layer
Now the fun part. I laid a thin ceramic coating, just like the hard coat we use in Panaflex and Nanoflex, right in front of the IR film and ran the test again. The heat sheet barely changed. Ceramic is a weak conductor, so it holds that absorbed energy in the glass and releases it at a crawl. Inside the car you feel cool and the A C works half as hard.
Remove the ceramic layer and the sheet flashes hot again. Put it back and the heat flow slams on the brakes. That simple.
Why This Matters to Your Customers
- Heat management: IR stops the energy, ceramic slows it down. Together they keep the cabin stable so the climate control is not fighting the sun all day.
- Color stability: Our films are carbon based, not dyed, so they stay deep black instead of turning purple after two summers.
- Bond you can trust: Seven years of real-world installs plus a global 500 factory behind us means you are not eating warranty claims.
Ready to Try It?
Both Panaflex and Nanoflex use this exact IR-plus-ceramic recipe. Hit flexfilmstore.com and order a roll right now. We ship to pros, hobbyists, anyone with a cart and a card. If you are installing for yourself, find a dealer you trust and hand them the film. If you run a shop, stock up and show your customers the same heat box demo. They will feel the difference in seconds.
Stay cool and keep pushing the craft.
Reading next

Dealer Rewards
Start earning points that can be applied as store credit on your next online purchase.

Order Online 24/7
Shop our products online and check out anytime, 24/7, from anywhere!

Call To Order
Call us directly to place your order during business hours, Monday - Friday, 8:00 AM - 4:00 PM CST.