Pre-Cut Pattern Tool Kit

Regular price $15.00
Shipping calculated at checkout.

Only -101 items in stock!

Our tool kits contain all the tools necessary to install our pre-cut patterns on your vehicle. It is not advised to install your film or pre-cut pattern without one of these kits.

*Product image may not accurately represent what you receive. See list below for the tools included.

Basic Tool Kit | $15  [How To Video]

For flat side windows that require no heat shrinking.

  • 1x Custom Cut Black Turbo Squeegee (Custom Cut GT146)
  • 1x Microfiber Cloth
  • 1x White Scrub Pad (GT085)
  • 1x Retractable Scraper w/ 5 Blades (GT138)
  • 1x Blue Tri-Edge X (GT2063B)
  • 1x 2oz Bottle of SlipX Slip Solution
  • 1x 16oz Spray Bottle

Advanced Tool Kit | $299

For any side window, back window, or windshield that require heat shrinking or the use of specialty tools for hard to reach areas.

  • 1x Custom Cut Black Turbo Squeegee (Custom Cut GT146)
  • 5x Microfiber Cloth
  • 5x White Scrub Pad (GT085)
  • 1x Retractable Scraper w/ 5 Blades (GT138)
  • 1x Blue Tri-Edge X (GT2063B)
  • 1x 2oz Bottle of SlipX Slip Solution
  • 1x 16oz Spray Bottle
  • 1x Wagner Heat Gun (GT250)
  • 1x Blue Max w/ Handle (GT122)
  • 1x 32oz Bottle of Tint-Tac
  • 1x 32oz Bottle of Pre-Tac
  • 1x Waist Apron (GT176)
  • 1x 1" Single Edge Blades - 1 Pack (GT140)
  • 1x Red Dot Knife (GT027NT)
  • 1x Original EZ Reach Platinum (GT2003PLT)
  • 1x Platinum Smart Card (GT1070)
  • 1x Spraymaster Bottle & Trigger (GT090)
  • 1x The Scrubber (GT209)
  • 1x The Shuttle (GT092)
  • 1x The Bulldozer I (GT205)
  • 1x Impact Jr. Pump-Up Sprayer (GT1008)
  • 1x Flexfilm Microfiber Dash Towel
  • 1x Film Opaquer Pen - Thin Point (GT076)
  • 1x Film Opaquer Pen - Broad Point (GT077)
  • 1x Black Hard Card (GT086BLK)
  • 1x White Hard Card (GT086W)
  • 1x 1" Thick Scrub Pad - 5 Pack (GT085THK)
  • 1x Gasket Push Stick (GT194)
  • 1x Stroke Doctor (GT1022)
  • 1x Olfa Carbon Snap Blades (GT1031)
  • 1x Olfa Stainless Steel Snap Blades (GT116)
  • 1x Olfa A1 Knife (GT127)

    How To Install A Pre-Cut Pattern On A Side Window [Basic Tool Kit]

    In this video, Ralph shows you how to install one of our pre-cut patterns on a side window using our basic tool kit.

    How To Install A Pre-Cut Pattern On A Back Window

    In this video, Ralph shows you how to install one of our pre-cut patterns on a back window using our tool kit.

    Important Info About Shrinking!

    You can only shrink window film in one direction. The direction you should shrink your window film will be dictated by the direction of the arrow stickers you will find on your pattern.

    How To Tell If You Need To Shrink On Your Vehicle

    If you notice the film won't lay down smoothly on the outside of the glass, you will need to heat shrink the film to fit your glass before you begin installation.

    Optional Items

    If you are working toward becoming a professional installer, you may want these additional items. Purchase at any hardware store.

    • Sharpie Permanent Marker
    • 24 Inch Ruler
    • Paper Towels
    • Elmer's Liquid Gel School Glue (Blue)
    • #000 Steel Wool
    • 400/600 Grit Wet Dry Sandpaper
    • Toothbrush
    • 7-Piece Precision Needle File Set
    • Shop Light For Illuminating Interior
    • Propyl Alcohol For Cleaning
    • Ivory Bar Soap
    • The Absorber Absorbing Towel
    • Cloth Gardening Gloves
    • Tape Measure
    • Painter's Tape

      *The tools included in each kit are subject to change as new tools release or become discontinued.